NEW Thermoforming and Stamping Automation Line

Thermoforming and Stamping Automation Line

The dual-arm feeder features a typical X‑Y‑Z axis configuration and offers two operating modes—Transfer and Feeder. It can cyclically perform actions such as clamping, lifting, feeding, lowering, releasing, and returning, enabling rapid handling of sheet materials. The transfer mode is well suited for applications with short stamping strokes, wide column spacing, and narrow dies, making it ideal for handling long, thin sheets. In this setup, the robot’s X‑axis and the end‑effector gripper remain within the press, avoiding interference and minimizing cycle time, thereby helping to shorten the overall line cycle time. The feeder mode is appropriate for long strokes and tight die pitches. Since the end‑effector picks up the sheet from the top of the stack, the overall material thickness is greater, requiring a larger die opening during loading and unloading. A simple rail system further reduces the feeder’s cycle time.

Learn more

< 1 >